OFFSET — Cut offset

Adjusts the cutter/tear-off offset in mm — a mechanical setting with no effect on drawing.

Engine status: Parsed, not rendered

The engine recognises the command and skips it: it is a DEVICE setting and does not change the image on the media. Your label still parses cleanly.

Syntax

OFFSET <o> mm

SIZE 100 mm, 150 mm
GAP 3 mm, 0 mm
CLS
OFFSET 0 mm
PRINT 1

Parameter	Meaning
`o mm`	Cutter/tear-off offset in millimetres; mechanical, no effect on the drawing