Home›Compatibility›ZPL on cab printers

ZPL on cab printers

Short answer: cab documents a ZPL emulation mode on 3 model(s) in our database, published under the name X4 nesli ZPL II emulasyonu, firmware >= 5.35; ZBI ve SGD desteklenmez (kilavuz 'Restrictions'); ureticinin brosuru de 'ZPL II (Datastream be tested in advance)' notunu dusuyor — one-cikan komut sapmalari kilavuzun komut tablosunda. That name is what you will find in the manual and what support will ask you about — not "ZPL support".

This is emulation, not native support. cab decides how much of ZPL its mode covers, and Labelixa has not physically tested it. What that means in practice

cab models documenting ZPL

Model	Documented mode	Vendor source
SQUIX 4.3 203/300 dpi · 104 mm · USB, USB Host, RS232, Ethernet	X4 nesli ZPL II emulasyonu, firmware >= 5.35; ZBI ve SGD desteklenmez (kilavuz 'Restrictions'); ureticinin brosuru de 'ZPL II (Datastream be tested in advance)' notunu dusuyor — one-cikan komut sapmalari kilavuzun komut tablosunda	Source 2026-09-01
EOS 2 203/300 dpi · 105 mm · USB, USB Host, RS232, Ethernet	X4 nesli ZPL II emulasyonu, firmware >= 5.35; ZBI ve SGD desteklenmez (kilavuz 'Restrictions'); ureticinin brosuru de 'ZPL II (Datastream be tested in advance)' notunu dusuyor — one-cikan komut sapmalari kilavuzun komut tablosunda	Source 2026-09-01
MACH 4S 300/600 dpi · 105 mm · USB, USB Host, RS232, Ethernet	X4 nesli ZPL II emulasyonu, firmware >= 5.35; ZBI ve SGD desteklenmez (kilavuz 'Restrictions'); ureticinin brosuru de 'ZPL II (Datastream be tested in advance)' notunu dusuyor — one-cikan komut sapmalari kilavuzun komut tablosunda	Source 2026-09-01

These are Industrial, Desktop units from the EOS, MACH 4S, SQUIX family, printing at 203/300/600 dpi with a 104/105 mm print width, reachable over Ethernet, RS232, USB, USB Host. The interface is part of the answer: an emulation mode is selected on the device or by a prefix in the stream, so how you reach the printer decides how you switch it.

cab ships these at 203/300/600 dpi, so the same ZPL coordinates land at different physical sizes depending on which unit you got — check that before you blame the emulation for a layout that came out wrong.

The cab claims here rest on the vendor's user manual. Source type is part of the evidence: a manual ships and is versioned with the product, while a support article can change without notice.

Or use a printer that runs it natively

ZPL is documented as a native language on printers from Zebra. If the hardware is still your choice, that removes the emulation question entirely.

All ZPL tools and printers

Check your code before you print

Questions

Will my existing ZPL labels print unchanged on a cab printer?
Not necessarily. cab's mode covers the subset of ZPL that cab chose, so fonts, barcode types and graphics are the usual places where output differs. Send one real label to the device and compare before you migrate a fleet.

All printer language compatibility pages

English Türkçe Deutsch