cab PX Q4

What cab PX Q4 runs, at which resolutions, and where each claim comes from.

Not physically tested by Labelixa. Everything on this page comes from manufacturer documentation, not from a printer on our bench. Verify on your own hardware before production.

Specifications

Manufacturer	cab
Family	PX Q
Category	Industrial
Resolution	300/600 dpi
Print width	105 mm
Connectivity	USB, USB Host, RS232, Ethernet

Printer languages

Native means the printer's own language. Emulation means a separate, manufacturer-documented mode that accepts another vendor's language — useful, but not the same thing.

Language	Type	Evidence
JScript	Native cab's native printer language (the PX Q brochure's Programming row lists it too)	VENDOR_DOCUMENTATION Source · 2026-09-02
ZPL	Documented emulation X4 generation ZPL II emulation, firmware >= 5.35; ZBI and SGD are not supported (manual 'Restrictions'); the vendor brochure also adds the note 'ZPL II (Datastream be tested in advance)' — notable command deviations are in the manual's command table	VENDOR_EMULATION_DOCUMENTATION Source · 2026-09-02

What this means in practice

This model accepts ZPL through a manufacturer-documented emulation mode. Emulations are generally good, but they are a separate mode: coverage and edge-case behaviour can differ from the native language, and no vendor promises byte-identical output. Test the specific label you intend to print.

JScript is the printer's own language here, so jobs written for it run without a translation layer — the closest thing to a predictable result.

This body ships in more than one resolution (300/600 dpi). ZPL coordinates are in dots, so a label designed for one resolution comes out at a different physical size on another — check which unit you actually have before sending production jobs.

Anything positioned beyond 105 mm of print width will not appear on the label; the compatibility checker flags this for the ZPL job you paste.

Tools for this printer

All printer models

English Türkçe Deutsch