Home›Printers›DASCOM DL-310

DASCOM DL-310

What DASCOM DL-310 runs, at which resolutions, and where each claim comes from.

Not physically tested by Labelixa. Everything on this page comes from manufacturer documentation, not from a printer on our bench. Verify on your own hardware before production.

Specifications

Manufacturer	DASCOM
Family	DL
Category	Desktop
Resolution	300 dpi
Print width	104 mm
Connectivity	USB

Printer languages

Native means the printer's own language. Emulation means a separate, manufacturer-documented mode that accepts another vendor's language — useful, but not the same thing.

Language	Type	Evidence
ZPL	Documented emulation ZPL EMULATION, and the VENDOR states it on its own 'Emulation' row (data sheet: 'Standard emulation EPL, ZPL II, TSC'; user manual technical table: 'Emulation: Zebra, EPSON / ZPL, EPL, TSC'). TWO DIFFERENCES set this record apart: (1) emulation is NOT off, it is the FACTORY DEFAULT — the manual's settings table lists 'Emulation: ZPL, EPL, TSPL' with default 'ZPL'; the configuration label also prints 'Emulation....ZPLII'. On NOVEXX and Printronix emulation was a mode that had to be TURNED ON first; here it ships on. (2) THERE IS A COVERAGE LIST — section 8.1 'ZPL Command Sets' of the manual lists the supported commands ONE BY ONE (measured: 187 commands, from `^A` to `~WQ`). Wasp and NOVEXX had NO such list; this is the first record that can answer 'which command' with the vendor's own document	VENDOR_EMULATION_DOCUMENTATION Source · 2026-09-18

What this means in practice

This model accepts ZPL through a manufacturer-documented emulation mode. Emulations are generally good, but they are a separate mode: coverage and edge-case behaviour can differ from the native language, and no vendor promises byte-identical output. Test the specific label you intend to print.

This body ships in a single resolution (300 dpi), which removes one class of surprise: a label written for it always renders at the same physical size, and a design made for a 300 dpi printer will come out roughly twice as large here.

Anything positioned beyond 104 mm of print width will not appear on the label; the compatibility checker flags this for the ZPL job you paste.

Tools for this printer

All printer models

English Türkçe Deutsch