Home›Printers›Brother TJ-4021TN

Brother TJ-4021TN

What Brother TJ-4021TN runs, at which resolutions, and where each claim comes from.

Not physically tested by Labelixa. Everything on this page comes from manufacturer documentation, not from a printer on our bench. Verify on your own hardware before production.

Specifications

Manufacturer	Brother
Family	TJ
Category	Industrial
Resolution	203 dpi
Print width	107 mm
Connectivity	USB, USB Host, RS232, Ethernet

Printer languages

Native means the printer's own language. Emulation means a separate, manufacturer-documented mode that accepts another vendor's language — useful, but not the same thing.

Language	Type	Evidence
FBPL	Native Brother's native printer language; FBPL is published as a 'Command Reference', the others as 'Emulation Guide'	VENDOR_DOCUMENTATION Source · 2026-09-02
ZPL	Documented emulation The FBPL-EZD/EZS firmware emulates ZPL II; the manual requires media settings to be made with BPM/FBPL first and lists the supported ^ commands ONE BY ONE. Coverage is not complete: a problematic command is switched off with SET ZPL_IGNORE (Appendix C, at most 10)	VENDOR_EMULATION_DOCUMENTATION Source · 2026-09-02
EPL	Documented emulation FBPL-EZD/EZS emulates EPL II; source: the separate 'EPL Emulation Guide' and its Appendix A device list	VENDOR_EMULATION_DOCUMENTATION Source · 2026-09-02
DPL	Documented emulation ONLY in the FBPL-EZD firmware: the manual lists two versions, 'FBPL-EZD (Compatible to EPL II, ZPL II, DPL)' and 'FBPL-EZS (... SBPL)' — an EZS device has SBPL instead of DPL	VENDOR_EMULATION_DOCUMENTATION Source · 2026-09-02

What this means in practice

This model accepts ZPL, EPL, DPL through a manufacturer-documented emulation mode. Emulations are generally good, but they are a separate mode: coverage and edge-case behaviour can differ from the native language, and no vendor promises byte-identical output. Test the specific label you intend to print.

FBPL is the printer's own language here, so jobs written for it run without a translation layer — the closest thing to a predictable result.

This body ships in a single resolution (203 dpi), which removes one class of surprise: a label written for it always renders at the same physical size, and a design made for a 300 dpi printer will come out roughly twice as large here.

Anything positioned beyond 107 mm of print width will not appear on the label; the compatibility checker flags this for the ZPL job you paste.

Tools for this printer

All printer models

English Türkçe Deutsch